Extremely easy flowing grade for very thin-walled moldings with difficult flow path to wall thickness ratios and very short cycle times.

Very easy to free-flowing, fast-curing grade for extremely difficult to machine applications requiring less mechanical properties.

Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower.

ULTRAFORM? S2320 FC AQUA UN is applicable for plastic parts, where the approvals of material for drinking water contact and direct food contact is a mandatory requirement.

Easy flowing and rapidly freezing grade for injection molding difficult, thin-walled parts.

Free-flowing, rapidly solidifying grade for moldings difficult to produce by injection molding and having low wall thickness; increased stiffness and heat distortion resistance.

Free-flowing, rapidly solidifying grade with increased stiffness and heat distortion resistance.

Mineral-reinforced material for low-warpage moldings with high stiffness, strength and hardness.

Grade with enhanced stiffness and strength as well as good wear properties, e.g. used for conveyor belts and transportation systems.

Ultraform? N 2650 Z6 is a polyoxymethylene (POM) copolymer product.